EcoQuip Blasting Trailer Rental.
Rent a Graco EcoQuip 2 EQ200T trailer-mounted vapor abrasive blasting system for surface preparation — rust, paint, and coating removal — across the Maryland Eastern Shore, Southern Delaware, and Virginia Eastern Shore.
Graco EcoQuip 2 EQ200T trailer unit shown; confirm rental configuration with dispatch.Towable Vapor Abrasive Blasting for Surface Preparation
The Graco EcoQuip 2 EQ200T is a towable, trailer-mounted vapor abrasive blasting system built for mid-to-high production surface preparation. A 100-gallon pot and 200 CFM onboard compressor deliver the air, water, and abrasive media mix that removes coatings, paint, and rust and prepares suitable surfaces for repainting or recoating. Because it's trailer-mounted, the rig comes to the jobsite rather than forcing you to haul material off-site. Included hose, nozzle, and abrasive media, plus onboard water and compressor setup, are confirmed with dispatch before every rental.
1 Day (24 Hrs)
1 Week
Delivery is a flat $300 round trip, shown separately from the rental rate. Longer durations and attachments are quoted on request.
What It's Used For
Rust & Coating Removal
Strip rust, old paint, and coatings from steel equipment, trailers, and structural steel so the surface is ready for a new coating.
Concrete Surface Preparation
Prepare and profile concrete surfaces for coatings, overlays, or repairs using a compatible abrasive and settings for the substrate.
Paint & Coating Removal
Remove old paint and finishes from suitable metal and masonry substrates ahead of repainting or recoating.
Steel & Equipment Restoration
Clean and restore steel beams, railings, tanks, and heavy equipment back to bare metal for repair or refinishing.
Restoration & Masonry Cleaning
Clean suitable masonry, brick, and concrete — including carefully matched test areas for graffiti removal on appropriate substrates.
Marine & Boat Refurbishment
Clean hulls and boatyard metal where vapor abrasive blasting suits the substrate — suitability confirmed on a test area before full work.
Who Rents This
- Painting and coating contractors
- Industrial and facility maintenance crews
- Restoration contractors
- Equipment and fleet maintenance shops
- Masonry and concrete contractors
- Marine and boatyard operators
Why It Helps
- Access project-specific blasting without purchasing a blasting system
- Trailer-mounted mobility brings the rig to the jobsite
- Vapor abrasive process reduces airborne dust compared with dry blasting
- Low water use compared with traditional wet or slurry blasting
- Controllable media and pressure for the project and substrate
Confirmed With Dispatch Before Rental
- Onboard water and compressor setup at your site
- Included hose, nozzle, and abrasive media (garnet or crushed glass as appropriate)
- Correct media grade and availability for your substrate
- Surface suitability — a test area confirms the setting before full work
How to Rent
Tell Us About Your Job
Share the surface, coating, and media you plan to use so we can match the right trailer configuration.
Confirm Suitability
We confirm the system, media, water and compressor setup, and surface suitability for your project.
Schedule Delivery
Flat $300 round-trip delivery to your site across Delmarva.
Blast & Restore
Strip and prep the surface on a confirmed test area — then we pick the trailer back up when you're done.
Local Coverage From Salisbury
Dispatched from our Salisbury-area operation across the Maryland Eastern Shore, Southern Delaware, and the Virginia Eastern Shore. Delivery is a flat $300 round trip and is confirmed with your request. Service availability varies by location and scheduling.
View All Service AreasEcoQuip Rental FAQ
How much does the EcoQuip 2 EQ200T blasting trailer rental cost?
The Graco EcoQuip 2 EQ200T rents for $850 per day (24 hours) or $2,500 per week. Delivery is a flat $300 round trip, shown separately from the rental rate. Onboard water, compressor setup, and included hose, nozzle, and abrasive media are confirmed with dispatch.
What is vapor abrasive blasting?
Vapor abrasive blasting mixes air, water, and abrasive media to remove coatings, paint, and rust while suppressing the airborne dust that dry blasting creates. It uses low water volume compared with traditional wet or slurry blasting.
Dry blasting vs. vapor abrasive blasting?
Dry blasting relies on air and abrasive alone and produces more airborne dust. Vapor abrasive blasting adds water to the stream to suppress dust at the surface, which can make it better suited to projects where dust control matters.
What can I use the EcoQuip 2 for?
Rust and coating removal, paint removal, steel and equipment restoration, concrete surface preparation, and suitable masonry and restoration cleaning. Confirm surface suitability on a test area first.
Do I need to supply the abrasive media and water?
Included hose, nozzle, and abrasive media (garnet or crushed glass as appropriate), plus onboard water and compressor setup, are confirmed with dispatch before your rental. Tell us your planned media and substrate so we can confirm the setup.
Does the rental include the compressor and onboard water?
The EcoQuip 2 EQ200T is a trailer-mounted rig with a 100-gallon pot, 200 CFM onboard compressor, and onboard water. Included hose, nozzle, and abrasive media are confirmed with dispatch before the rental.
Do you deliver across Delmarva?
Yes. We deliver from our Salisbury-area operation across the Maryland Eastern Shore, Southern Delaware, and the Virginia Eastern Shore. Delivery is a flat $300 round trip.
How do I request the EcoQuip 2?
Use the Request Rental button or call dispatch. We confirm availability, the trailer configuration, media, and delivery before the rental is set — this is a request, not a live reservation.
Related Equipment
Need the EcoQuip for your next job?
Request the EcoQuip or call dispatch to confirm availability, attachments, and delivery across Delmarva.